EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is often a very economical solar controller created for off-grid photo voltaic techniques. According to multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for an array of photovoltaic (PV) purposes.
Crucial Capabilities of your EPEVER Tracer AN Series Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Cost Controller technologies for superior solar Strength harvesting. Important characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Sophisticated MPPT Algorithm with >ninety nine% performance.
Dual-Phase Charging for Increased battery life.
LCD Display with actual-time facts checking.
A number of Load Command Modes together with handbook and timer.
Comprehensive Electronic Protections versus overcharging, above-discharging, brief circuits, and reverse polarity.
Stage-by-Phase Information to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and person manual.
Verify the model variety and voltage scores match your photo voltaic panel and battery specifications.
two. Mounting the Demand Controller
Pick out a very well-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always adhere to suitable security protocols and ensure the procedure is run off ahead of connecting elements.
Step one: Hook up the battery terminals towards the demand controller (favourable to beneficial, damaging to unfavorable).
Move two: Link the photo voltaic panel array to your PV input terminals.
Step three: Link the load terminals if utilizing a immediate load link.
Stage four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking visit here using the MT50 distant meter.
Information is usually logged through the RS485 communication port making use of computer software such as Photo voltaic Station Computer.
Distant monitoring is achievable Along with the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Situation 1: No Ability Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Regulate method parameters if necessary.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Technology
The multiphase synchronous rectification technological innovation guarantees:
Better Efficiency: Minimized Power losses through conversion.
Increased Reliability: Steady effectiveness beneath variable masses.
Longer Battery Everyday living: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is definitely an exceptional choice for optimizing solar energy technology and extending battery daily life. By next the above set up manual, buyers can guarantee most efficiency and technique longevity.